Chapter 4 Tutorial
NWA1100-N User’s Guide
41
13 Click Apply to finish configuration for NWA (A).
4.3.3 Configuring the NWA in Wireless Client Mode
The NWA (B) should have a wired connection before it can be set to wireless client operating mode.
Connect your NWA to the FTP server. Login to NWA (B)’s Web Configurator and go to the Wireless
> Wireless Settings screen. Follow these steps to configure station B.
1 Select Wireless Client as Operation Mode. Select Profile1 as the SSID Profile. Click Apply.
2 Click on the Site Survey tab. A window should pop up which contains a list of all available wireless
devices within your NWA’s range.
To Next Page
Loading...
