Select the LDAP server you create.
Figure 268 CONFIGURATION > Object > Auth. Method > Authentication
method > Add
Make sure the security list select the 802.1X authentication and correct
LDAP server. Since LDAP server doesn’t support EAP protocol and cannot
be an authentication server, so NXC has built-in FreeRADIUS server provide
EAP protocol for station authentication. The RADIUS server type must select
Internal when the external authenticated server is LDAP server.
Figure 269 CONFIGURATION > Object > AP profile > SSID > Security List >
Add
Check the security profile with 802.1X authentication.
Figure 270 CONFIGURATION > Object > AP profile > SSID > SSID List
To Next Page
Loading...
