Manual: Set the AC-IP by user.
Figure 45 CONFIGURATION > MGNT Mode > Managed AP > Static IP
Note: If you have many managed APs on site will set AC-IP, we suggest that
set the AC-IP on the DHCP with option 138. The managed APs get the IP will
also know the AC-IP and send the CAPWAP packet to controller ask for
managing.
4 Check the CAPWAP status of AP
If the AP is managed by the controller, the AC-IP shows the controller’s IP
and the SM-state is RUN(8).
Figure 46 Tera Term > AP > Router > show capwap ap info > SM-State
If the SM-State doesn’t show RUN(8), please check the AC-IP.
Figure 47 Tera Term > AP > Router > show capwap ap info > SM-State
To Next Page
Loading...
