Figure 87 CONFIGURATION > Wireless > AP Management > Mgnt. AP List >
Edit > Edit AP List > VLAN Settings
Check the “Override Group VLAN setting” and “Force Overwrite VLAN
Config” boxes to modify the VLAN ID of controller for having same
management VLAN ID as the managed AP. Changing “Management
VLAN ID” to 10, and unchecking “As Native VLAN” box which make
NWA5160-N sending out packet with VLAN ID 10 tag.
Note: Check the As Native VLAN means the packets with VLAN ID untag.
Apply the configuration and checking management VLAN ID of controller.
Figure 88 MONITOR > Wireless > AP Information > AP List
Example of Configuration Conflict about the radio profile: the radio 2 was
set in 2.4GHz.
To Next Page
Loading...
