overlapped area RSSI value, the station is not able to connect with AP.
For example, the station signal threshold is -50dBmm, but the overlapped
area RSSI is -60 to -65dBmm. Station is not able to connect with AP.
The threshold is disabled in default setting, and can change in GUI.
Figure 175 CONFIGURATION > Object > AP Profile > Radio > Edit Radio
Profile > Show Advanced Settings
3 Does station always connect to AP1?
If AP1’s coverage is too large to overlap most of AP2’s, station is able to
keep connecting with AP.
The power strength of AP is able to change.
To Next Page
Loading...
