ZyXEL Communications P-662HW-D - Starting OTIST; Figure 69 Example Wireless Client OTIST Screen; Figure 70 Security Key

Chapter 7 Wireless LAN
P-662H/HW-D Series User’s Guide
127
7.6.1.2 Wireless Client
Start the ZyXEL utility and click the Adapter tab. Select the OTIST check box, enter the
same Setup Key as your AP’s and click Save.
Figure 69 Example Wireless Client OTIST Screen
7.6.2 Starting OTIST
" You must click Start in the AP OTIST web configurator screen and in the
wireless client(s) Adapter screen all within three minutes (at the time of
writing). You can start OTIST in the wireless clients and AP in any order but
they must all be within range and have OTIST enabled.
1 In the AP, a web configurator screen pops up showing you the security settings to
transfer. After reviewing the settings, click OK.
Figure 70 Security Key