ZyXEL Communications P-871M - CPE Mode Setup

ZyXEL Confidential
awp0b1
4/4
CI Command List
Command Description
sys display system status
help show this screen
exit logout
passwd change login password
default reset all configurations to default
upgrade [fw|conf] firmware/configurations upgrade
vdsl uprate [x] set/show VDSL uprate(2000 - 100000
Kbps)
downrate [y] set/show VDSL downrate(2000 - 100000
Kbps)
snr [z] set/show VDSL SNR(0 - 24 dB)
interleave [i] set/show VDSL interleave depth(0 -
100 0.5ms)
reset reset VDSL chip
reconnect force VDSL reconnect
show show VDSL parameters setting
profile (profile) set/show VDSL profile
active [on|off] active/deactive VDSL port
enet auto [on|off] set/show ENET auto negotiation mode
speed (speed) set/show ENET speed(10 or 100 Mbps)
duplex [full|half] set/show ENET duplex mode
fctrl [on|off] set/show ENET flow control
status display ENET statistics
clear clear ENET statistics