ZyXEL Communications PMG5318-B20A - Navigation Panel

Chapter 2 The Web Configurator
PMG5318-B20A User’s Guide
17
2.2.2 Navigation Panel
Use the menu items on the navigation panel to open screens to configure GPON Device features.
The following tables describe each menu item.
Table 2 Navigation Panel Summary
LINK TAB FUNCTION
Status This screen shows the GPON Device’s general device and network
status information. Use this screen to access the statistics and client
list.
Network
WAN Internet Access
Setup
Use this screen to configure ISP parameters, WAN IP address
assignment, DNS servers and other advanced properties.
Default
Gateway
Use this screen to configure your ONT’s default gateway settings.
Multicast Setup Use this screen to configure your ONT’s IGMP settings.
LAN
Wireless LAN
IP & DHCP Use this screen to configure LAN TCP/IP and DHCP settings, enable Any
IP and other advanced properties.
Client List Use this screen to look at the IP addresses currently assigned to DHCP
clients and the IP addresses reserved for specific MAC addresses.
Port Speed Use this screen to configure your ONT’s LAN port speed settings.
General Use this screen to turn the wireless connection on or off, configure the
MAC filter, and make other basic configuration changes.
Security Use this screen to set up wireless security.
WPS Use this screen to enable or disable WPS, generate a security PIN
(Personal Identification Number) and see information about the ONT’s
WPS status.
WPS Station Use this screen to set up WPS by pressing a button or using a PIN.
MAC Filter Use this screen to allow or deny MAC address(es) for specific wireless
networks.
WMM Use this screen to enable Wi-Fi MultiMedia (WMM) to ensure quality of
service in wireless networks for multimedia applications.
Status Use this screen to view all accociated wireless clients and their status.
Isolation Use this screen to control whether associated wireless clients can
communicate with each other across a different wireless network
through the GPON Device.
NAT Port Forwarding Use this screen to configure port forwarding rules.
QoS General Use this screen to enable and configure QoS settings for specific traffic.
VoIP
SIP SIP Service
Provider
Use this screen to configure the SIP settings used by the GPON Device
when you place calls over the Internet.
SIP Account Use this screen to configure your SIP account information.
Phone Analog Phone Use this screen to set which phone ports use which SIP accounts.
Phone Book Speed Dial Use this screen to configure speed dial for SIP phone numbers that you
call often.
Usb Services
File Sharing Share
Configuration
Use this screen to enable file sharing via the GPON Device.
Account
Management
Use this screen to configure user accounts to access file shares.