ZyXEL Communications PMG5318-B20A - 802.1 Q VLAN ID - Edit

Chapter 4 WAN
PMG5318-B20A User’s Guide
37
4.3.4 802.1Q VLAN ID - Edit
Use this screen to configure the 802.1Q VLAN ID settings for a WAN interface. Click Edit next to
802.1Q VLAN ID on an Internet Access Setup screen.
Figure 13 802.1Q VLAN ID - Edit
The following table describes the labels in this screen.
Apply Click Apply to save the changes.
Cancel Click Cancel to begin configuring this screen afresh.
Table 7 Internet Access Setup - Bridging (continued)
LABEL DESCRIPTION
Table 8 802.1Q VLAN ID - Edit
LABEL DESCRIPTION
Provisioned VLAN/
Pbit
The available VLAN/Pbit values provisioned by the OLT are listed in this column. You
can select a VLAN/Pbit to be used by this WAN interface.
Status This column displays the current status of the respective VLAN/Pbit. It will display if it
is in use by a WAN interface, or not in use.
Apply Click Apply to save the changes.