Chapter 4 WAN
PMG5318-B20A User’s Guide
38
4.4 Default Gateway
Use this screen to configure your GPON Device’s default gateway settings. Click Network > WAN
> Default Gateway.
Figure 14 Default Gateway
The following table describes the labels in this screen.
Table 9 Default Gateway
LABEL DESCRIPTION
WAN Interface Select a WAN interface you want to act as the default gateway.
WAN Status This displays if the interface displayed in the WAN Interface column is Up or Down.
Apply Click Apply to save the changes.
Cancel Click this to restore your previously saved settings.
To Next Page
Loading...
