Chapter 6 Wireless LAN
PMG5318-B20A User’s Guide
53
6.5 The WPS Station Screen
Use this screen to set up a WPS wireless network using either Push Button Configuration (PBC) or
PIN Configuration.
Click Network > Wireless LAN > WPS Station. The following screen displays.
Figure 25 Network > Wireless LAN > WPS Station
The following table describes the labels in this screen.
6.5.1 MAC Filter
Use this screen to change your GPON Device’s MAC filter settings.
Table 19 Network > Wireless LAN > WPS Station
LABEL DESCRIPTION
Push Button Click this to add another WPS-enabled wireless device (within wireless range of the
GPON Device) to your wireless network. This button may either be a physical button on
the outside of device, or a menu button similar to the Push Button on this screen.
Note: You must press the other wireless device’s WPS button within two minutes of
pressing this button.
Or input station's
PIN number
Enter the PIN of the device that you are setting up a WPS connection with and click Start
to authenticate and add the wireless device to your wireless network.
You can find the PIN either on the outside of the device, or by checking the device’s
settings.
Note: You must also activate WPS on that device within two minutes to have it present its
PIN to the GPON Device.
To Next Page
Loading...
