ZyXEL Communications PMG5318-B20A - Page 86

Chapter 9 Voice
PMG5318-B20A User’s Guide
86
Without a dial plan, users have to manually enter the whole callee’s number and wait for the
specified dialing interval to time out or press a terminator key (usually the pound key on the phone
keypad) before the GPON Device makes the call.
The GPON Device initializes a call when the dialed number matches any one of the rules in the dial
plan. Dial plan rules follow these conventions:
• Rules are separated by the | (bar) symbol.
• “x” stands for a wildcard and can be any digit from 0 to 9.
• A subset of keys is in a square bracket []. Ranges are allowed.
For example, [359] means a number matching this rule can be 3, 5 or 9. [26-8*] means a
number matching this rule can be 2, 6, 7, 8 or *.
• The dot “.” appended to a digit allows the digit to be ignored or repeated multiple times. Any digit
(0~9, *, #) after the dot will be ignored.
For example, (01.) means a number matching this rule can be 0, 01, 0111, 01111, and so on.
• <dialed-number:translated-number> indicates the number after the colon replaces the number
before the colon in an angle bracket <>. For example,
(<:1212> xxxxxxx) means the GPON Device automatically prefixes the translated-number
“1212” to the number you dialed before making the call. This can be used for local calls in the
US.
(<9:> xxx xxxxxxx) means the GPON Device automatically removes the specified prefix “9” from
the number you dialed before making the call. This is always used for making outside calls from
an office.
(xx<123:456>xxxx) means the GPON Device automatically translates “123” to “456” in the
number you dialed before making the call.
• Calls with a number followed by the exclamation mark “!” will be dropped.
• Calls with a number followed by the termination character “@” will be made immediately. Any
digit (0~9, *, #) after the @ character will be ignored.
• Gateway: Type “=gw0=” or “=gw3=” at the end of the rule. If the number matches the call will
be transferred to a gateway (0: FXS port; 3: SIP).
In this example dial plan (0 | [49]11 | 1 [2-9]xx xxxxxxx | 1 947 xxxxxxx !), you can dial “0” to call
the local operator, call 411 or 911, or make a long distance call with an area code starting from 2 to
9 in the US. The calls with the area code 947 will be dropped.