Chapter 4 Tutorials
SBG3500-N Series User’s Guide
63
6 In Fedora, issue the following openssl command to generate the host certificate for the SBG3500-N
Series:
openssl ca -config ./openssl.conf -policy policy_anything -out sbg.pem
-infiles sbg.req
7 Click the Load_Signed button in the View Certificate screen.
8 Cut the contents of sbg.pem (only the binary portion between BEGIN CERTIFICATE and END
CERTIFICATE). You can use "vi" or your favorite text editor to cut the portion, but do not use the
"cat" command.
9 Paste it to the indicated part of the Certificate section in the View Certificate screen. Click
Apply.
To Next Page
Loading...
