ZyXEL Communications UAG5100 - 1.4.3 Navigation Panel

26/29
www.zyxel.com
© Copyright 1995-2017, ZYXEL Communications Corp. All rights reserved.
 Use the Xmodem feature of terminal emulation software to upload the file.
 Wait for about 3.5 minutes until finishing Xmodem.
 Enter atkz –f –l 192.168.1.1 performing the “Restore Firmware” process.
 Enter atgo to bring up the FTP server on port 1
2. Restore Firmware
 If “Connect a computer to port 1 and FTP to 192.168.1.1 to upload the new
file” displays on the screen, you need to recover the firmware by the following
procedure.
 You will use FTP to upload the firmware package. Keep the console session