ZyXEL Communications VMG3925-B30C - Page 279

Chapter 39 Diagnostic
VMG3925-B10C/B30C User’s Guide
279
Figure 168 Maintenance > Diagnostic > OAM Ping
The following table describes the fields in this screen.
Table 126 Maintenance > Diagnostic > OAM Ping
LABEL DESCRIPTION
Select a PVC on which you want to perform the loopback test.
F4 segment Press this to perform an OAM F4 segment loopback test.
F4 end-end Press this to perform an OAM F4 end-to-end loopback test.
F5 segment Press this to perform an OAM F5 segment loopback test.
F5 end-end Press this to perform an OAM F5 end-to-end loopback test.