34 | ©2017
EN
Meaning of the LEDs in modem mode
Power
green on Power supply present.
flashing Device is being initialized or
green reset to the factory settings.
red on Device error detected, e.g., er-
ror
during self-test.
flashing New firmware is being loaded.
red Please wait.
off Power supply not present
DSL
on Successfully connected to
DSL.
flashing DSL synchronization is in
quickly progress.
flashing DSL connection being esta-
blished
slowly or synchronization failed,
e.g., because the DSL cable is
not plugged in or DSL is not
available.
off DSL interface not activated.
INET (Internet)
off Device is operating in modem
mode.
TEL (telephone)
off Internet telephony is not sup-
ported in modem mode.
WLAN
off Wi-Fi is not supported in
modem mode.
EN
To Next Page
Loading...
