ZyXEL Communications XGS-4528F - Table 67 RADIUS Attributes - Exec Events Via Console; Table 68 RADIUS Attributes - Exec Events Via Telnet;Ssh; Table 69 RADIUS Attributes - Exec Events Via Console

Chapter 23 Authentication & Accounting
XGS-4528F User’s Guide
198
23.3.2.2 Attributes Used for Accounting Exec Events
The attributes are listed in the following table along with the time that they are sent (the
difference between Console and Telnet/SSH Exec events is that the Telnet/SSH events utilize
the Calling-Station-Id attribute):
23.3.2.3 Attributes Used for Accounting IEEE 802.1x Events
The attributes are listed in the following table along with the time of the session they are sent:
Table 67 RADIUS Attributes - Exec Events via Console
ATTRIBUTE START INTERIM-UPDATE STOP
User-Name
DD D
NAS-Identifier
DD D
NAS-IP-Address
DD D
Service-Type
DD D
Acct-Status-Type
DD D
Acct-Delay-Time
DD D
Acct-Session-Id
DD D
Acct-Authentic
DD D
Acct-Session-Time
DD
Acct-Terminate-Cause
D
Table 68 RADIUS Attributes - Exec Events via Telnet/SSH
ATTRIBUTE START INTERIM-UPDATE STOP
User-Name
DD D
NAS-Identifier
DD D
NAS-IP-Address
DD D
Service-Type
DD D
Calling-Station-Id
DD D
Acct-Status-Type
DD D
Acct-Delay-Time
DD D
Acct-Session-Id
DD D
Acct-Authentic
DD D
Acct-Session-Time
DD
Acct-Terminate-Cause
D
Table 69 RADIUS Attributes - Exec Events via Console
ATTRIBUTE START INTERIM-UPDATE STOP
User-Name
DD D
NAS-IP-Address
DD D
NAS-Port
DD D
Class
DD D
Called-Station-Id
DD D