XGS1210-12 User’s Guide
40
A broadcast frame (or a multicast frame for a multicast group that is known by the system) is duplicated
only on ports that are members of the VID (except the ingress port itself), thus confining the broadcast to
a specific domain.
9.2 VLAN Settings
Use this screen to view and configure VLAN settings for the Switch. Click VLAN in the navigation panel to
open the following screen.
Note: You could block yourself (and all others) from managing the Switch if you remove all
ports from VLAN1 and you do not configure other VLAN groups. In case this happens,
reset the Switch to the default settings (see Section 4.4 on page 21 for more
information).
Figure 24 VLAN
The following table describes the labels in this screen.
Table 7 VLAN
LABEL DESCRIPTION
PVID
Port This field displays the port number.
PVID A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a port so
that the frames are forwarded to the VLAN group that the tag defines.
Enter a number between 1 and 4094 as the port VLAN ID.
To Next Page
Loading...
