XGS1210-12 User’s Guide
51
Figure 30 IGMP Snooping
The following table describes the labels in this screen.
Table 13 IGMP Snooping
LABEL DESCRIPTION
IGMP Snooping
Enable IGMP
Snooping
Select this option to enable IGMP Snooping to forward group multicast traffic only to ports that
are members of that group.
Unknown
Multicast Drop
Select this option to discard the frame when the Switch receives an unknown multicast frame.
Otherwise, the Switch sends the frame to all ports.
IGMP Static
Router Port
Select a port (Port 1~12) to be used as an IGMP router port.
Select Auto to allow any port to be used as an IGMP router port upon receiving an IGMP query.
The Switch treats an IGMP query port as being connected to an IGMP multicast router (or
server). The Switch forwards IGMP join or leave packets to an IGMP router port.
Note: If link aggregation is enabled, the ports in a link aggregation group will not be
available in this field.
Apply Click Apply to save your changes to the Switch.
To Next Page
Loading...
