Chapter 14 Management
XGS1210-12 / XGS1250-12 User’s Guide
62
Figure 45 Switch Management (XGS1250-12)
The following table describes the labels in this screen.
Table 19 Switch Management
LABEL DESCRIPTION
Device Setting
Reset Click this button to clear all Switch configuration information you configured and return to the
factory defaults.
If you want to access the Switch Web Configurator again, you may need to change the IP
address of your computer to be in the same subnet as that of the default Switch IP address
(192.168.1.3).
Reboot Click this button to restart the Switch without physically turning the power off.
To Next Page
Loading...
