Chapter 5 Tutorials
GS1910/XGS1910 Series User’s Guide
59
In Switch C:
1 Access the Switch through http://192.168.1.1. Log into the Switch by entering the username
(default: admin) and password (default: 1234).
2 Go to Configuration > Port Mirroring. Select Enabled in the Mode field to activate mirroring on
the Switch.
3 Set Type to Destination to configure the intermediate ports that help forward traffic.
4 Enter the remote port mirroring VLAN ID number (100 in this example). The Switch will
automatically create the remote port mirroring VLAN and configure the intermediate and
destination ports as a member of this VLAN.
5 Configure a port (2 for example) to act as the intermediate port that connects to Switch B.
6 Configure a port (10 for example) to act as the destination port that receives the copy of traffic
from the source port on Switch A for analysis.
7 Click Save.
To Next Page
Loading...
