Chapter 5 Tutorials
GS1910/XGS1910 Series User’s Guide
65
8 Click Save. The ordering of your rules is very important as rules are applied in the order that they
are listed.
This tutorial uses the XGS1910-24 screens as an example. The screens may vary slightly for
different models.
9 Go to Configuration > Security > Network > ACL > Ports. Enter the ID of the ACL policy you
just created in the Policy ID field of the port to which you want to apply this policy, that is, port 9
to which host A is connected in this example.
To Next Page
Loading...
