Chapter 33 Green Ethernet
XGS2220 Series User’s Guide
217
Figure 156 PORT > Green Ethernet
The following table describes the labels in this screen.
Table 101 PORT > Green Ethernet
LABEL DESCRIPTION
EEE Enable the switch button to activate Energy Efficient Ethernet globally.
Auto Power
Down
Enable the switch button to activate Auto Power Down globally.
Short Reach Enable the switch button to activate Short Reach globally.
Port This field displays the port number.
* Use this row to make the setting the same for all ports. Use this row first and then make
adjustments to each port if necessary.
Changes in this row are copied to all the ports as soon as you make them.
EEE Select this to activate Energy Efficient Ethernet on this port.
Auto Power
Down
Select this to activate Auto Power Down on this port.
Short Reach Select this to activate Short Reach on this port.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
To Next Page
Loading...
