Chapter 4 Web Configurator
XGS2220 Series User’s Guide
74
After clicking Next, the Networked AV screen appears.
Figure 52 Wizard > Advanced Settings > Step 3 Networked AV
Each field is described in the following table.
Trap Community Enter the Trap Community string, which is the password sent with each trap to the SNMP
manager.
The Trap Community string is only used by SNMP managers using SNMP version 2c or lower.
Previous Click Previous to show the previous screen.
Next Click Next to show the next screen.
Cancel Click Cancel to exit this screen without saving.
Table 18 Wizard > Advanced Settings > Step 3 Networked AV
LABEL DESCRIPTION
Allocate networked AV service to a VLAN
Networked AV
VLAN
Enter a number between 1 and 4094 to create a VLAN for the AVoIP network (see Figure 3
on page 34 for details on an AVoIP network).
IP Address
(Optional)
You must enter a different VLAN ID in the previous field (Networked AV VLAN) to be able to
assign another IP address for the Switch to be managed over the AVoIP network.
IP Subnet Mask
(Optional)
You must enter a different VLAN ID in the Networked AV VLAN field to be able to assign
another subnet mask that specifies the network number portion of an IP address.
Select Ports and Assign a Port Role
Table 17 Wizard > Advanced Settings > Step 2 Password (continued)
LABEL DESCRIPTION
To Next Page
Loading...
