Chapter 4 Web Configurator
XGS2220 Series User’s Guide
95
4.6.1 Tables and Lists
The Web Configurator tables and lists provide several options for how to work with their entries.
4.6.1.1 Working with Table Entries
Tables have tool icons for working with table entries as shown next. You can select one or more entries,
or select the check box in the heading row to select all entries. Use the tool icons to modify the selected
entries.
Figure 65 Working with a Table
The following table describes the most common table icons.
When viewing a list, you can click on an index number to view more details about the entry. If the list has
more than one page, click the arrow button to navigate to different pages of entries.
Save
Configuration
This link takes you to a screen where you can save the current configuration (settings) to a
specific configuration file on the Switch.
Firmware
Upgrade
This link takes you to a screen to upload firmware to your Switch.
Reboot System This link takes you to a screen to reboot the Switch without turning the power off.
Tech-Support This link takes you to a screen where you can download related log reports for issue analysis.
Log reports include CPU history and utilization, crash and memory.
Table 30 Navigation Panel Links (Networked AV Mode) (continued)
LINK DESCRIPTION
Table 31 Common Table Icons
LABEL DESCRIPTION
Select an entry’s check box to select a specific entry. Otherwise, select the check
box in the table heading row to select all entries.
Add/Edit Click this to create a new entry or edit a selected entry. A configuration screen
where you can add a new entry or modify the settings of the selected entry will
open.
In some configuration screens, the Add/Edit button is replaced by the Edit button.
This means you can only edit the existing entries in the table.
Delete To remove entries, select the entries and click Delete.
To Next Page
Loading...
