Chapter 14 Mirroring
GS3700/XGS3700 Series User’s Guide
140
Click the Source link in the RMirror screen. The following screen opens.
Figure 80 Advanced Application > Mirroring > RMirror > Source
The following table describes the labels in this screen.
Table 56 Advanced Application > Mirroring > RMirror > Source
LABEL DESCRIPTION
RMirror VLAN ID Select the RMirror VLAN over which the mirrored traffic is forwarded.
Priority Enter the priority of the mirrored traffic.
Reflector Port Select the check box to enable the specified reflector port.
Enter the number of reflector port that adds the RMirror VLAN tag to all mirrored traffic
and forwards traffic to the connected port(s) in the same RMirror VLAN.
Port This field displays the port number.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this
row first to set the common settings and then make adjustments on a port-by-port
basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Mirrored Select this option to mirror the traffic on a port.
To Next Page
Loading...
