Chapter 16 Port Authentication
GS3700/XGS3700 Series User’s Guide
155
16.2.1 Activate IEEE 802.1x Security
Use this screen to activate IEEE 802.1x security. In the Port Authentication screen click 802.1x
to display the configuration screen as shown.
Figure 91 Advanced Application > Port Authentication > 802.1x
The following table describes the labels in this screen.
Table 64 Advanced Application > Port Authentication > 802.1x
LABEL DESCRIPTION
Active Select this check box to permit 802.1x authentication on the Switch.
Note: You must first enable 802.1x authentication on the Switch before configuring it on
each port.
Port This field displays a port number.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row
first to set the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active Select this checkbox to permit 802.1x authentication on this port. You must first allow
802.1x authentication on the Switch before configuring it on each port.
To Next Page
Loading...
