Chapter 8 Basic Setting
XGS4600 Series User’s Guide
117
8.11.2 Stacking Slot
Click a stack number in Basic Setting > Stacking > Stacking Status to display the Stacking Slot Status
screen as shown next.
Figure 93 Basic Setting > Stacking > Stacking Status > Slot
The following table describes the labels in this screen.
Status This field displays whether the stacked Switch is active or inactive in a stack system.
Init means the slot ID is being initialized by the master Switch.
active* means the Switch is in the stack, but some items failed to initiate. See the system logs for
details. If the Switch is not a master, disconnect and reconnect the stacking port and wait.
Restart the Switch if it still displays active*. If the Switch is a master, restart it or choose another
master.
MAC address This field displays the MAC address of the stacked Switch
.
Role This field displays whether the Switch is a master, backup or linecard. There’s only one master
and one backup Switch in the stacking mode; all others are linecard Switches.
Stacking Topology: Ring/Chain
Slot No. This field displays the slot ID number of the stacked Switch.
Stacking Channel1
Neighbor This field displays the neighbor Switch that is connected using slot channel 1 of the Switch.
Speed This field displays the Ethernet speed of stacking channel 1 of the Switch.
Stacking Channel2
Neighbor This field displays the neighbor Switch that is connected to slot channel 2 of the Switch.
Speed This field displays the Ethernet speed of stacking channel 2 of the Switch.
Table 38 Basic Setting > Stacking > Stacking Status (continued)
LABEL DESCRIPTION
Table 39 Basic Setting > Stacking > Stacking Status > Slot
LABEL DESCRIPTION
Slot This field displays the slot ID of the Switch.
Stacking This field displays whether the Switch is active in the stacking system.
Role This field displays whether the stacked Switch is a master, backup or linecard Switch
.
To Next Page
Loading...
