ZyXEL Communications XGS4600 Series - VLAN Configuration

Chapter 9 VLAN
XGS4600 Series User’s Guide
127
Figure 100 Advanced Application > VLAN > Private VLAN Status
The following table describes the labels in this screen.
9.5 VLAN Configuration
Use this screen to view IEEE 802.1Q VLAN parameters for the Switch. Click Advanced Application > VLAN
> VLAN Configuration to see the following screen.
Figure 101 Advanced Application > VLAN > VLAN Configuration
The following table describes the labels in the above screen.
Table 44 Advanced Application > VLAN > Private VLAN Status
LABEL DESCRIPTION
Private VLAN
Status
These fields show information for the all private VLANs. See also Advanced Application > Private
VLAN.
Primary
VLAN
This field shows the primary VLAN ID in a private VLAN.
Secondary
VLAN
This field shows the secondary VLAN ID in a private VLAN.
Type This field shows the type of private VLAN: Primary, Community or Isolated.
Port List This shows the ports mapped to the private VLAN using the Advanced Application > Private
VLAN or Advanced Application > VLAN > Static VLAN screen.
Change Pages Use the Previous and Next buttons to display different pages.
Table 45 Advanced Application > VLAN > VLAN Configuration
LABEL DESCRIPTION
Static VLAN Setup Click Click Here to configure the Static VLAN for the Switch.
VLAN Port Setup Click Click Here to configure the VLAN Port for the Switch.
Subnet Based VLAN Setup Click Click Here to configure the Subnet Based VLAN for the Switch.
Protocol Based VLAN Setup Click Click Here to configure the Protocol Based VLAN for the Switch.
Voice VLAN Setup Click Click Here to configure the Voice VLAN for the Switch.