Chapter 14 Bandwidth Control
XGS4600 Series User’s Guide
182
Figure 146 Advanced Application > Bandwidth Control (Standalone Mode)
Figure 147 Advanced Application > Bandwidth Control (Stacking Mode)
The following table describes the related labels in this screen.
Table 67 Advanced Application > Bandwidth Control
LABEL DESCRIPTION
Active Select this check box to enable bandwidth control on the Switch.
SLOT This field appears only in stacking mode. Click the drop-down list to choose the slot number of the
Switch in a stack.
Port This field displays the port number. In stacking mode, the first number represents the slot ID and the
second is the port number. Please note that the default stacking ports (the last two ports of your
Switch) cannot be configured. They are reserved for stacking only.
To Next Page
Loading...
