Chapter 24 VLAN Stacking
XGS4600 Series User’s Guide
252
Figure 193 Advanced Application > VLAN Stacking (Standalone Mode)
Figure 194 Advanced Application > VLAN Stacking (Stacking Mode)
The following table describes the labels in this screen.
Table 97 Advanced Application > VLAN Stacking
LABEL DESCRIPTION
Active Select this check box to enable VLAN stacking on the Switch.
SLOT This field appears only in stacking mode. Click the drop-down list to choose the slot number of the
Switch in a stack.
Port This field displays the port number. In stacking mode, the first number represents the slot ID and the
second is the port number. Please note that the default stacking ports (the last two ports of your
Switch) cannot be configured. They are reserved for stacking only.
To Next Page
Loading...
