ZyXEL Communications XGS4600 Series - Chapter 3 Hardware Panels; Front Panel Connections; Hardware Panels

Chapter 3 Hardware Panels
XGS4600 Series User’s Guide
34
CHAPTER 3
Hardware Panels
This chapter describes the front panel and rear panel of the Switch and shows you how to make the
hardware connections.
3.1 Front Panel Connections
The following figures show the front panels of the Switch.
Figure 9 Front Panel: XGS4600-32
Figure 10 Front Panel: XGS4600-32F
Figure 11 Front Panel: XGS4600-52F
The following table describes the ports.
Table 3 Front Panel Connections
CONNECTOR DESCRIPTION
24 10/100/
1000Base-T RJ-45
Ethernet Ports or 24
SFP Slots or 48 SFP
Slots
Connect these ports to a computer, a hub, an Ethernet switch or router.
4 GbE Combo Ports
(Dual Personality
Interfaces)
Each interface has one 1000Base-T copper RJ-45 port and one SFP slot, with one port active
at a time.
• Four 1000Base-T Ports:
Connect these ports to a computer, an Ethernet switch or router.
• Four SFP Slots:
Use Small Form-Factor Pluggable (SFP) transceivers in these ports for fiber connections to
an Ethernet switch or router.