Chapter 42 BPDU Guard
XGS4600 Series User’s Guide
410
Figure 328 Advanced Application > BPDU Guard Status (Stacking Mode)
The following table describes the fields in the above screen.
42.3 BPDU Guard Configuration
Use this screen to turn on the BPDU guard feature on the Switch and ports.
In the BPDU Guard Status screen, click Configuration to display the configuration screen as shown.
Table 186 Advanced Application > BPDU Guard Status
LABEL DESCRIPTION
BPDU guard globally
configuration
This field displays whether BPDU guard is activated on the Switch.
SLOT This field appears only in stacking mode. Click the drop-down list to choose the slot
number of the Switch in a stack.
Port This field displays the port number. In stacking mode, the first number represents the slot ID
and the second is the port number. Please note that the default stacking ports (the last
two ports of your Switch) cannot be configured. They are reserved for stacking only.
Active This shows whether BPDU guard is activated on the port.
Status This shows whether the port is shut down (Err-disable) or able to transmit packets
(Forwarding).
To Next Page
Loading...
