Chapter 42 BPDU Guard
XGS4600 Series User’s Guide
411
Figure 329 Advanced Application > BPDU Guard > BPDU Guard Configuration (Standalone Mode)
Figure 330 Advanced Application > BPDU Guard > BPDU Guard Configuration (Stacking Mode)
The following table describes the fields in the above screen.
Table 187 Advanced Application > BPDU Guard > BPDU Guard Configuration
LABEL DESCRIPTION
Active Select this option to enable BPDU guard on the Switch.
SLOT This field appears only in stacking mode. Click the drop-down list to choose the slot number of
the Switch in a stack.
Port This field displays the port number. In stacking mode, the first number represents the slot ID and
the second is the port number. Please note that the default stacking ports (the last two ports of
your Switch) cannot be configured. They are reserved for stacking only.
To Next Page
Loading...
