ZyXEL Communications XGS4600 Series - ZULD Configuration

Chapter 44 ZULD
XGS4600 Series User’s Guide
425
44.3 ZULD Configuration
Use this screen to enable ZULD on a port, configure a mode and set the probe time. To open this screen,
click Advanced Application > ZULD > Configuration.
Figure 341 Advanced Application > ZULD > Configuration (Standalone Mode)
Remote MAC Addr This is the MAC address of the port on the connected device to which the port of the
Switch is connected.
Remote Port This is the port number of the port on the connected device to which the port of the Switch
is connected.
Table 192 Advanced Application > ZULD Status (continued)
LABEL DESCRIPTION