Chapter 53 Differentiated Services
XGS4600 Series User’s Guide
480
Figure 383 IP Application > DiffServ (Standalone Mode)
Figure 384 IP Application > DiffServ (Stacking Mode)
The following table describes the labels in this screen.
Table 223 IP Application > DiffServ
LABEL DESCRIPTION
Active Select this option to enable DiffServ on the Switch.
Slot This field appears only in stacking mode. Click the drop-down list to choose the slot number of the
Switch in a stack.
Port This field displays the index number of a port on the Switch. In stacking mode, the first number
represents the slot and the second the port number. * means all ports (on the same Switch).
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set the
common settings and then make adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
To Next Page
Loading...
