Chapter 60 Diagnostic
XGS4600 Series User’s Guide
563
Distance to
fault
This displays the distance between the port and the location where the cable is open or
shorted.
This shows N/A if the Pair status is Ok.
This shows Unsupported if the Switch chipset does not support to show the distance.
Locator LED Enter a time interval (in minutes) and click Blink to show the actual location of the Switch
between several devices in a rack.
The default time interval is 30 minutes.
Click Stop to have the Switch terminate the blinking locater LED.
Table 271 Management > Diagnostic (continued)
LABEL DESCRIPTION
To Next Page
Loading...
