Chapter 65 IP Table
XGS4600 Series User’s Guide
578
65.2 Viewing the IP Table
Click Management > IP Table in the navigation panel to display the following screen.
Figure 473 Management > IP Table
The following table describes the labels in this screen.
Table 279 Management > IP Table
LABEL DESCRIPTION
Sort by Click one of the following buttons to display and arrange the data according to that button type.
The information is then displayed in the summary table below.
IP Click this button to display and arrange the data according to IP address.
VID Click this button to display and arrange the data according to VLAN group.
Port Click this button to display and arrange the data according to port number.
Index This field displays the index number.
IP Address This is the IP address of the device from which the incoming packets came.
VID This is the VLAN group to which the packet belongs.
Port This is the port from which the above IP address was learned. This field displays CPU to indicate the
IP address belongs to the Switch. In stacking mode, the first number represents the slot and the
second the port number.
Type This shows whether the IP address is dynamic (learned by the Switch) or static (belonging to the
Switch).
To Next Page
Loading...
