Chapter 6 Tutorials
XGS4600 Series User’s Guide
75
Figure 56 Tutorial: Enable DHCP Client & Option 60
5 You need to save the current configuration in a configuration file, so the Switch will load the auto
configuration file from the TFTP server automatically when rebooting. Go to the Management >
Maintenance screen. Click the Config 1, Config 2, or Custom Default button next to the Save
Configuration field.
6 Click the same button next to Reboot System field to reboot the Switch, and load the auto configuration
setting as configured before. For example, if you save the auto configuration setting to Config 1, you
need to click the Config 1 button next to the Reboot System field.
To Next Page
Loading...
