ZyXEL Communications XGS4600 Series - Port Setup

Chapter 8 Basic Setting
XGS4600 Series User’s Guide
97
8.7 Port Setup
Use this screen to configure Switch port settings. Click Basic Setting > Port Setup in the navigation panel
to display the configuration screen.
Figure 73 Basic Setting > Port Setup (Standalone Mode)
Figure 74 Basic Setting > Port Setup (Stacking Mode)
Delete Click Delete to remove the selected entry from the summary table.
Note: Deleting all IP subnets locks you out of the Switch.
Cancel Click Cancel to clear the check boxes.
Table 21 Basic Setting > IP Setup > IP Configuration (continued)
LABEL DESCRIPTION