ZyXEL Communications XMG1930-30 - Chapter 13 Neighbor; Neighbor; Neighbor Overview; What You Can Do

Chapter 13 Neighbor
XMG1930 Series User’s Guide
134
CHAPTER 13
Neighbor
13.1 Neighbor Overview
The Neighbor screen allows you to view a summary and manage the Switch’s neighboring devices. It
uses Layer Link Discovery Protocol (LLDP) to discover all neighbor devices connected to the Switch
including non-Zyxel devices. You can use this screen to perform tasks on the neighboring devices like
login, power cycle (turn the power off and then back on again), and reset to factory default settings.
This screen shows the neighboring device first recognized on an Ethernet port of the Switch. Device
information is displayed in gray when the neighboring device is offline.
13.1.1 What You Can Do
Use the Neighbor screen (Section 13.2 on page 134) to view a summary and manage the Switch’s
neighbor devices.
Use the Neighbor Details screen (Section 13.2.1 on page 135) to view more detailed information on the
Switch’s neighbor devices.
13.2 Neighbor
Click MONITOR > Neighbor to see the following screen.
Figure 80 MONITOR > Neighbor (example PoE model)