Chapter 4 Web Configurator
XMG1930 Series User’s Guide
78
• Protection – to enable loop guard and broadcast storm control on the Switch and its ports.
• VLAN
– to create a static VLAN, assign ports to the VLAN and set the ports to tag or untag outgoing
frames.
• QoS – to determine a port’s IEEE 802.1p priority level for QoS.
Figure 46 Setup Wizard
4.5.1 Basic
In Basic, you can set up IP/DNS, set up your password, SNMP community, link aggregation, and view
finished results.
In order to set up your IP/DNS, please do the following. Click Wizard > Basic > Step 1 IP to access this
screen.
To Next Page
Loading...
