Chapter 7 Wireless
XMG3512-B10A User’s Guide
85
7.2 The General Screen
Use this screen to enable the Wireless LAN, enter the SSID and select the wireless security mode.
Note: If you are configuring the XMG from a computer connected to the wireless LAN and
you change the XMG’s SSID, channel or security settings, you will lose your wireless
connection when you press Apply to confirm. You must then change the wireless
settings of your computer to match the XMG’s new settings.
Click Network Setting > Wireless to open the General screen.
Figure 32 Network Setting > Wireless > General
To Next Page
Loading...
