ZyXEL Communications XS1930 Series - 18.2 Port Authentication Configuration; 18.3 Activate IEEE 802.1 x Security

Chapter 18 Port Authentication
XS1930 Series User’s Guide
169
18.2 Port Authentication Configuration
To enable port authentication, first activate the port authentication method(s) (both on the Switch and
the port(s)), then configure the RADIUS server settings in the AAA > RADIUS Server Setup screen.
Click Advanced Application > Port Authentication in the navigation panel to display the screen as
shown. Select a port authentication method’s link in the screen that appears.
Figure 123 Advanced Application > Port Authentication
18.3 Activate IEEE 802.1x Security
Use this screen to activate IEEE 802.1x security. In the Port Authentication screen click 802.1x to display
the configuration screen as shown.
Figure 124 Advanced Application > Port Authentication > 802.1x