ZyXEL Communications XS1930 Series - Clustering Management Configuration

Chapter 40 Cluster Management
XS1930 Series User’s Guide
322
40.3 Clustering Management Configuration
Use this screen to configure clustering management. Click Management > Cluster Management >
Configuration to display the next screen.
Figure 238 Management > Cluster Management > Configuration
Model This field displays the model name.
Status This field displays:
Online (the cluster member switch is accessible)
Error (for example the cluster member switch password was changed or the switch was set as the
manager and so left the member list, etc.)
Offline (the switch is disconnected - Offline shows approximately 1.5 minutes after the link
between cluster member and manager goes down)
Table 169 Management > Cluster Management: Status (continued)
LABEL DESCRIPTION