ZyXEL Communications XS1930 Series - Poe Time Range Setup

Chapter 8 Basic Setting
XS1930 Series User’s Guide
93
8.8.1 PoE Time Range Setup
Use this screen to apply a schedule to the port(s) on the Switch. You must first configure a schedule in
the Advanced Application > Time Range screen.
Click the PoE Time Range Setup link in the Basic Setting > PoE Setup screen. The following screen opens.
Figure 66 Basic Setting > PoE Setup > PoE Time Range Setup
The following table describes the labels in this screen.
Max Power (W) This field displays the maximum amount of power the PD could use from the Switch on this port.
Time Range
State
This field shows whether or not the port currently receives power from the Switch according to its
schedule.
• It shows “In” followed by the time range name if PoE is currently enabled on the port.
• It shows “Out” if PoE is currently disabled on the port.
• It shows “-” if no schedule is applied to the port. PoE is enabled by default.
Table 31 Basic Setting > PoE Setup (continued)
LABEL DESCRIPTION
Table 32 Basic Setting > PoE Setup > PoE Time Range Setup
LABEL DESCRIPTION
Port Time Range Setup
Port Enter the number of the port to which you want to apply a schedule.