ZyXEL Communications ZyWall ATP series - Page 187

187/782
www.zyxel.com
Type the Rule Name used to identify this VPN connection (and VPN gateway).
You may use 1-31 alphanumeric characters. This value is case-sensitive. Select the
rule to be Site-to-site. Click Next.
Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings (Scenario)
Configure Secure Gateway IP as the WatchGuard’s WAN IP address (in the
example, 172.100.30.63). Then, type a secure Pre-Shared Key (8-32 characters).
Set Local Policy to be the IP address range of the network connected to the
ZyWALL/USG and Remote Policy to be the IP address range of the network
connected to the WatchGuard. Click OK.
Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings (Configuration)