ZyXEL Communications ZyWALL USG 100 Series - Configure Zones

Chapter 7 Tutorials
ZyWALL USG 100/200 Series User’s Guide
118
1 Click Configuration > Network > Interface > Ethernet and double-click the
opt interface’s entry.
Set the Interface Type to internal.
Set the IP Address to 192.168.4. and the Subnet Mask to 255.255.255.0.
Set DHCP to DHCP Server and click OK.
Figure 62 Configuration > Network > Interface > Ethernet > Edit opt
7.1.3 Configure Zones
Do the following to create a VPN zone.
1 Click Configuration > Network > Zone and then the Add icon.