ZyXEL Communications ZyWALL USG 100 Series - Configure Port Roles

Chapter 7 Tutorials
ZyWALL USG 100/200 Series User’s Guide
119
2 Enter VPN as the name, select Default_L2TP_VPN_Connection and move it to
the Member box and click OK.
Figure 63 Configuration > Network > Zone > WAN Edit
7.1.4 Configure Port Roles
Here is how to remove port P6 from the ext-wlan interface and add it to the dmz
interface.
1 Click Configuration > Network > Interface > Role.
2 Under P6 select the dmz (DMZ) radio button and click Apply.
Figure 64 Configuration > Network > Interface > Port Roles Example