ZyXEL Communications ZyWALL USG 100 Series - Configure the Authentication Policy

Chapter 7 Tutorials
ZyWALL USG 100/200 Series User’s Guide
159
Repeat as needed to create endpoint security objects for other Windows operating
system versions.
7.9.2 Configure the Authentication Policy
Click Configuration > Auth. Policy > Add to open the Endpoint Security Edit
screen. Use this screen to configure an authentication policy to use endpoint
security objects.
• Enable the policy and name it.
•Set the Source Address to LAN1 and the Destination Address to any, the
Schedule set to none, and Authentication set to required to apply this
policy to all users.
• Select Force User Authentication to redirect the HTTP traffic of users who are
not yet logged in to the ZyWALL’s login screen.
• Enable EPS checking and move the EPS objects you created to the selected list.
•Click OK.
Figure 117 Configuration > Auth. Policy > Add